AMD SB750 Uživatelský manuál stáhnout pdf (Strana 9)

Chapter 2: Using RAID Option ROM

The Main Menu (above) has five options:

• Press 1 to view physical drive assignments

• Press 2 to create a logical drive or view information about an existing logical

drive.

• Press 3 to delete a logical drive.

• Press 4 to view the controller configuration.

• Press Esc (Escape) to exit the utility.

Viewing Drive Assignments

From the Main Menu screen, press 1 to see the View Drive Assignments screen

(below).

This screen reports physical drive assignments and provides the following

information:

• Channel: ID – Shows the AMD motherboard channel ID (1 through 4) to

which a particular physical drive is attached.

• Drive Model – Identifies the manufacturer, model, and model number (if

applicable) of each physical drive.

• Capabilities – The type and speed of the physical drive, such as SATA

1.5 Gb/s or 3.0 Gb/s

• Capacity (GB) – Reflects the capacity in GB (gigabytes) of the physical

drive.

• Assignment – This field identifies the logical drive to which the physical

drive belongs. In the example above, there is one logical drive composed of

two physical drives. LD 1-2 means logical drive 1, physical drive 2.

Unassigned drives are labeled Single Disk. You can use unassigned drives

to create a new logical drive.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Žádné komentáře

AMD SB750 Uživatelský manuál Strana 9