AMD LE-363 User's Uživatelská příručka stáhnout pdf (Strana 160)

100

101

134 XgOS User’s Guide • September 2014

vHBA Topology

The following figure displays a typical vHBA topology.

An IB connection exists between the Oracle Fabric Interconnect and host servers

supporting the OVN vHBA host software stack. Up to 24 IB ports are supported. A

2-port FC I/O card connects to a storage area network (SAN) FC switch fabric. All

the host server vHBAs multiplex through the FC ports on the I/O card. A storage

array is attached to the switch fabric. Initiators are host servers that request I/O

processing and actively seek out and interact with target devices on the SAN.

Targets are passive storage devices (arrays, JBODs, RAIDs, and so on) that respond

to requests sent by initiators. The Oracle Fabric Interconnect itself is an I/O initiator

that provides a conduit for host-server initiators to send commands to the fabric.

Note – Some target devices function also as data replicators. In this case, these

targets function also as I/O initiators replicating data (sync) to other locations.

The vHBA host software defines how the FC protocol will be transported (in/out)

over IB. Without this software and the details of the transport, the vHBA will not

function and the payload cannot be sent over IB.

Both initiators and targets have a World Wide Node Name (WWNN) and a World

Wide Port Name (WWPN). A 2-port FC card itself has one WWNN, and each port

has its own WWPN. These IDs register with one another to establish

communication.

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 435 436

Komentáře k této Příručce

Žádné komentáře

AMD LE-363 User's Uživatelská příručka Strana 160

Komentáře k této Příručce